RVR TX06KSS/20S42 6.2 KW HOTSWAP PLUG IN SOLID STATE TRANSMITTER

RVR TX06KSS/20S42 6.2 KW HOTSWAP PLUG IN SOLID STATE TRANSMITTER

AUDIOSCIENCE ASI8821-5500 PCI EXPRESS 8 CHANNELS OF HD-RADIO/DAB/DAB+, 8 RECORD PCM/HALF LENGTH ADAPTER

AUDIOSCIENCE ASI8821-5500 PCI EXPRESS 8 CHANNELS OF HD-RADIO/DAB/DAB+, 8 RECORD PCM/HALF LENGTH ADAPTER

RVR TX10KSS/20S41 10.5 KW HOTSWAP PLUG IN SOLID STATE TRANSMITTER

SKU
TX10KSS/20S41
MFR#
TX10KSS/20S41
$71,199.00
Availability: In stock
The PJ10KPS-CA is a RF amplifier for frequency modulation sound broadcasting. It is a fully solid-state apparatus of modern design that uses MOSFET as active components in the FM amplifying modules. This chapter briefly describes the machine’s main features.

SPECIAL SHIPPING RATES

On orders over $1000

WHOLESALING PRICING

Ask us how to become a Wholesaler

SECURED PAYMENT

Guaranteed safe payment options

The PJ10KPS-CA transmitter is made up of modules inserted in a 19” rack. The main apparatuses are:

• 5x RF amplifier modules at 2.2 kW nominal

• 1x Control unit (CU)

• 1x Splitter/Input RF

• 1x Dummy load In configuration standard it comes supplied with Rack from 32 unit. Other dimensions of the Rack always from 19” but with various heights (40 unit) are available upon request.

The amplifier is supplied complete with all its parts, not really "modules", essential for its operation such as the fans for dissipating the heat generated by the machine inside the room and all the accessories for the electrical and RF wiring. As a rule, the amplifier is supplied as a complete transmitter therefore the two FM exciters that it manages will be provided and connected (a service exciter and a spare exciter).


 

Your Rating

Features

  • Tunable over entire FM band (87.5 – 108 MHZ), without tuning.> Overall efficiency better than 70%.
  • Hot-pluggable and broadband power amplifier modules.
  • Each module features switching mode power supply to control and stabilize power supply voltage.
  • Each amplifier module provides Automatic Power Control.
  • Suitable for mono & stereo broadcast operations.
  • Protection against high VSWR, overdrive, overcurrent and overtemperature.
  • Compliance to IEC safety standards.
  • Compliance to ETSI – CCIR – FCC standards.
  • Entire transmitter can be switched off through an emergency button.
  • High redundancy guaranteed by 5 power modules of 2.2 kW RF power.
  • All measurement and working parameters are displayed on front panel.
  • Remotely controllable by telemetry system.
  • Design for 24/7 non-stop operation.
  • The transmitter include an integrated system for automatic and manual switching between two exciters.
  • In Automatic mode the changeover is activated when active power of exciter falls below 3dB.

Specifications

TX10KSS/60D41

Parameter

Value

GENERALS

 

RF Output Power 

10,5 kW 

Frequency Range 

87,5 – 108 MHz 

Frequency Stability 

> 1 ppm 

Frequency programmability 

By software, with 1, 10, 100 , 1000 kHz steps 

Nominal Frequency Deviation 

±75 KHz (peak) 

Maximum Frequency Deviation 

±150 KHz (peak) 

Class of Emission 

180KF8E Direct to Channel 

Modulation Mode 

Mono, Stereo, Multiplex, SCA, RDS, Aux 

Stereo transmissions 

Acc. to ITU-R / Rec.  450 (Pilot  tone) 

RF Output Impedance 

50 Ω, Unbalanced 

RF Output Connector 

1-5/8” EIA Flange (3-1/8” EIA Flange on request) 

VSWR 

1.4:1 with automatic fold-back at higher VSWR 

Pre-emphasis Mode 

0/50 (CCIR) µs,75 (FCC) μs 

Asynchronous AM S/N Ratio 

Typically >70dB 

Synchronous AM S/N Ratio 

Typically > 55dB 

Harmonics suppression and Spurious 

Typically < 85dB 

Overall efficiency 

Typically > 70% 

RF Harmonics 

Exceeds ETSI/CCIR/FCC requirements 

RF Spurious 

Exceeds ETSI/CCIR/FCC requirements 

Analogue Input level {+75 Khz (peak) deviation } 

-12,5 dBu - +12,5 dBu (adjustable) 

Digital Input level {+75 Khz (peak) deviation } 

-20,0 dBFS – 0 dBFS (adjustable) 

MONO OPERATION

 

S/N ratio 

Typically > 83dB 

Total Harmonic Distortion + Noise 

Typically < 0,03% 

Inter Modulation Distortion SMPTE 

Typically < 0,02% 

Frequency Response 

Typically ±0,2dB 

Audio Input Impedance 

600 Ω or 10 kΩ 

MPX OPERATION

 

Composite S/N ratio 

Typically > 80dB 

Total Harmonic Distortion + Noise 

Typically < 0,05% 

Inter Modulation Distortion 

Typically < 0,05% 

Frequency Response 

Typically ±0,2dB 

Audio Input Impedance 

10 kΩ 

STEREO OPERATION

 

Stereo FM S/N Ratio 

Typically > 83dB 

Total Harmonic Distortion + Noise (L or R) 

Typically < 0,02% 

Inter Modulation Distortion SMPTE  (L or R) 

Typically < 0,02% 

Frequency  response (L or R) 

Typically ±0,2dB 

Linear Cross Talk 

Typically > 50dB 

Non-linear Cross Talk 

Typically > 50dB 

Stereo Separation (Sine Wave) 

Typically > 70dB 

Audio Input Impedance 

600 Ω or 10 kΩ 

Digital Input Impedance 

110 Ω