To help get RDS on-air quickly and effortlessly, a very simple and intuitive Windows® interface has been included on the CD-ROM that comes with the SmartGen Micro encoder (and also available on our website). It can be used by anyone for setting the static IDs and flags, to program default entries into the dynamic messaging fields, and for setting of other operating parameters that affect how data is displayed on the radio.
The SmartGen "Micro" will identify your station by format, display your station's "street name", and continuously transmit your station promo or advertising message.
SmartGen "Micro" Encoder is a quick and inexpensive way to have an RDS/RBDS available. The SmartGen "Micro" is able to transmit basic RDS information such as the Program Service name (PS), Program Identification(PI), Alternative Frequencies(AF), Program Type(PTY). Decoder Information and Music / Speech flag are also supported. USB connectivity makes it easy to program the non-volatile memory using any PC and the supplied Windows® software. After programming, the unit should be disconnected and re-installed on the transmitter site. Though it is not capable of "dynamic" messaging of the song titles, SmartGen "Micro" will identify your station by format, displaying your station's "street name", continuously transmitting any station promo or advertising message to your listeners.
Programming software:
Based on our more than 15 years of experience in the RDS field, the SmartGen Basic RDS/RBDS Encoders Manager was developed as a dedicated software for full management of our Basic RDS Encoders range as regards to the latest updates of the RDS/RBDS Standards.
Features
Very Attractive Price
Very Good Price-Performance Ratio
PS & Radio Text Scrolling Options
Fully Digital Synthesis of RDS signal
MPX Loopthrough & Sidechain Modes
Internal or external Pilot / MPX Synchronisation
Very Intuitive Windows Configuration Software
Proved and reliable hardware for 24/7/365 operating
Built-in dedicated 19kHz source for internal sync
Works with any FM exciter and stereo generator
Supports both RDS & RBDS standards
Easy Installation and Setup
USB Programming Interfaces
Built-in failsafe bypass relay
Robust Aluminum Case for high RF immunity
Specifications
TECHNICAL SPECIFICATIONS
Pilot/MPX Input: Yes
MPX/RDS Output: 0 to 3199 mV
Inputs/Outputs: No
Communication Port: USB
Synchronization: External (Pilot or MPX) / Internal / Auto
Synchronization Monitoring: No
RDS Level adjustment: with trim pot
Phase adjustment: Yes
Separate outputs for RDS+MPX and for RDS only: No
Command to activate the RDS SCA: No
Side Chain Mode, Loop through mode, Bypass feature: Yes
RDS Subcarrier: 100% Digitally Generated Shape / Bypass: 0 dB
Pilot synchronization: Input Level: -50dBu to +12dBu / Frequency: 19kHz, ±3Hz
EN50067 compliant: Yes
Accurate Clock Time (CT) Sync with Internet Connection : No
Remote TA actuation for Traffic Announcements: No
GPS module for automatic synchronization of the built-in clock: No
Fully independent RDS decoder for self-monitoring purposes: No
Firmware can be upgraded in the field: No
Front-panel LCD displays all programmed data: No
Data may be entered on-site with Front-panel Buttons: No
Operating Temperature: 0°C / 55°C
RDS FEATURES
COMMUNICATION
POWER
SIZE AND WEIGHT