AXIA GPIO XNODE PN 2001-00301 AC POWER + PoE AOIP INTERFACE WITH 6 GPIO PORTS FOR CONTROL OF PERIPHERAL DEVICES

Features:

• Fanless design with cast-aluminum heat-sinks is completely silent in-studio. Front-panel heat sinks are cooled by ambient air, not “rack air,” eliminating overheating worries.
• World’s only fully AES67-compliant AoIP interface; xNodes are “universal translators” that support a huge installed base of Livewire+ hardware as well as audio streams from other AES67-compliant devices. Now features improved AES67 performance through reception optimization.
• First and only AoIP I/O device that is Livewire+, RAVENNA, and AES67 compliant. Every xNode not only supports RAVENNA audio stream interoperability, but also enables advertising/discovery of those streams natively, above and beyond AES67.
• High-resolution front-panel multi-function OLED display meters inputs and outputs or GPIO status, gives software and other status information.
• Power-efficient: xNodes use just 14 Watts each.
• Exclusive redundant power plan uses AC and Power over Ethernet (IEEE 802.3af) supplied by compliant Ethernet switches. Multi-color front-panel LED glows green when AC mains power is used, red when PoE is used, and orange when both AC and PoE are connected.
• Exclusive redundant network connection: Dual NICs allow you to connect xNode to separate network branches for full audio pathway redundancy. Automatic failover activates backup connection should the primary be interrupted.
• Built-in Syslog server with configurable event filter and SNMP (Simple Network Management Protocol) support help you stay fully informed, should an xNode’s power or connection status change.
• Synchronize your AES master clock to a designated xNode AES/EBU input to keep all of your AES streams synchronized to the house clock.
• xNodes use premium components, including rugged cast aluminum faceplates and heat sinks, high-resolution OLED displays, bulletproof power supplies designed for high-availability telecom applications, studio-quality SRCs with recording-studio specs.
• I/O connections via industry-standard RJ-45 audio connectors or high-density DB-25 connections, both available prefabricated and ready to attach in seconds.
• Versatile mounting options: Use freestanding, rack singly or side-by-side in 1 RU, or wall-mount using an optional surface-mount kit.
• SAP Support

Specifications:

 Microphone Preamplifiers

• Source Impedance: 150 Ohms
• Input Impedance: 4 k Ohms minimum, balanced
• Nominal Level Range: Adjustable, -75 dBu to -20 dBu
• Input Headroom: >20 dB above nominal input
• Phantom power: +48VDC, switchable

Analog Line Inputs

• Input Impedance: >40 k Ohms, balanced
• Nominal Input Range: Selectable, +4 dBu or -10dBv
• Input Headroom: 20 dB above nominal inputMeta

Analog Line Outputs

• Output Source Impedance: <50 Ohms balanced
• Output Load Impedance: 600 Ohms, minimum
• Nominal Output Level: +4 dBu
• Maximum Output Level: +24 dBu

Digital Audio Inputs And Outputs

• Reference Level: +4 dBu (-20 dB FSD)
• Impedance: 110 Ohm, balanced
• Signal Format: AES3 (AES/EBU)
• AES3 Input Compliance: 24-bit with sample rate conversion
• AES3 Output Compliance: 24-bit
• Digital Reference: Internal (network timebase) or external reference 48 kHz, +/- 2 ppm
• Internal Sampling Rate: 48 kHz
• Input Sample Rate: 32 kHz to 192 kHz
• Output Sample Rate: 44.1 kHz or 48 kHz
• A/D Conversions: 24-bit, Delta-Sigma, 256x oversampling
• D/A Conversions: 24-bit, Delta-Sigma, 256x oversampling

Frequency Response

• Any input to any output: +/- 0.5 dB, 20 Hz to 20 kHz

Latency

• Analog Input to Analog Output, 2.75ms including network, converters, and mixing process
• Digital Input to Digital Output, 1.75ms including network mixing engine (ASRC off)

Dynamic Range

• Analog Inputs to Analog Outputs 108dB referenced to 0dBFs, 111dB A-weighted
• Analog Inputs to Digital Outputs 110dB referenced to 0dBFs, 113dB A-weighted
• Digital Inputs to Analog Outputs 112dB referenced to 0dBFs, 115dB A-weighted
• Digital Inputs to Digital Outputs 126dB

Equivalent Input Noise

• Microphone Preamp: -128 dBu, 150 Ohm source, reference -50 dBu input level

Total Harmonic Distortion + Noise

• Mic Pre Input to Analog Output: < 0.005%, 1 kHz, -36dBu input, +18dBu output
• Analog Input to Analog Output: < 0.005%, 1 kHz, +18dBu input, +18dBu output
• Analog Input to Digital Output: < 0.004%, 1 kHz, +18dBu input, -6dBFs output
• Digital Input to Analog Output: < 0.004%, 1 kHz, -6dBFs input, +18dBu output
• Digital Input to Digital Output: < 0.0003%, 1 kHz, -20dBFs

Crosstalk Isolation, Stereo Separation And CMRR

• Analog Line channel to channel isolation: 90dB minimum, 20Hz to 20kHz
• Analog Line stereo separation: 85dB minimum, 20Hz to 20kHz
• Analog Line Input CMRR: 80dB minimum, 20Hz to 20kHz
• Microphone Input CMRR: >60 dB, 20 Hz to 20 kHz

Power Supply AC Input

• Auto-ranging supply, 95VAC to 240VAC, 50 Hz to 60 Hz, IEC receptacle, internal fuse
• Power consumption: 14 Watts

Operating Temperatures

• 0 degree C to +40 degree C, <90% humidity, no condensation

Dimensions

• 8.5” (22 cm) wide; two may be mounted side-by-side in a standard 1RU rack space; 1.72” (4.4 cm)
  height, 11.75” (30 cm) depth