ASK ABOUT OUR SPECIAL SHIPPING RATES ON ORDERS OVER $1000
Language
English
Features
Dx816/Dx822 Specs
Inputs | 5 MIC balanced inputs (XLR) [10 MICs in DX822]. Fader-1 = MIC1 // Fader-2 = MIC2 + MIC4 // Fader-3 = MIC3 + MIC5. 2 balanced stereo Line inputs (RJ45). 2 unbalanced stereo Line inputs (RCA). 1 unbalanced stereo input Tuner (On Air Monitor) (TRS) 2 Digital stereo Line inputs (USB). |
Inputs Level & Impedance | Balanced MIC = -10 dBu / -75 dBu; 150/250 Ohms. Balanced LINE = -20 dBu / + 26 dBu; 600 ~ 10Kohms. Unbalanced LINE = -15 dBu / + 12 dBu; 600 ~ 10Kohms. Digital: -12 dB FS to -18 dB FS. |
Phantom Power | 3 x condenser MIC inputs in DX816 or 6 x condenser MICs in DX822 With 48 V power supply internal phantom. Switchable ON / OFF // Complies with DIN 45596 Standard. |
Analog & Digital Outputs | 2 outputs stereo bus; PGM & REC, balanced + 4 dBm. Max Level + 28dBu (10K), + 20dBm (600 ohms) RJ45 connector. 2 UNBAL stereo bus outs (PGM & REC) at 0 dBu, TRS connector. 2 x USB Digital Stereo outputs (PGM & REC). 2 x Digital Stereo AoIP Outs (Option: AoIP) (RJ45). 2 x Digital AES Outs (Option: 2AES); PGM & REC (RJ45). |
Digital Input / Output Level | It uses the K-12 recommendation for broadcating; Then, 0 VU is at -12 dB Full Scale level. |
Tally Light Out | ON-AIR signal output (turns on When MIC is open) 12 V dc @ 0.15 amp (two Solidyne On-Air Tally light) With automatic recovery Overload protected. |
Monitor & Hybrid Outputs | 1 Stereo Studio, 0 dBu for active speakers, muted (RJ45) 1 Stereo Control, 0 dBu for active speakers, muted (Mini-jack) 1 Stereo Studio Headphones, with Distribution AMP up to ... 8 headphones, + 10 dBu out (RJ45) 1 Stereo Control Headphones, + 10 dBu Out (Mini-Jack) 1 External Hybrid send (MIX-Minus) +4 dBu / 10K (TRS) |
CUE Monitor | Monitor CUE Amplifier monkey added at L & R channels of monitor output. Level controlled at front panel |
Headroom | 24 dB @ LIN to PGM Ref + 4dBu / 10k |
GPIO (start external devices) | From MIC-1, MIC-2 MIC-3 faders in DX816 [MIC-1 ... .. MIC-6 in DX822] From Line 6 & 7 Open collector: max + 24V @ 0.1A |
Frequency response | 20-20,000 Hz +/- 0.5 dB (LIN to PGM) |
Mic Equalizer | One MIC equalizer in DX816; two in DX822 With Four Bands MIC EQ In / Out switch; 80 Hz top flat curve, shaped bell 160 Hz, 6.3 kHz bell shaped, flat top 10 kHz Action + 15 dB / -15 dB |
Mic Compressor | Low distortion MIC compressor Automatically It works over 0 VU level. 20 dB max compression. Attack time <10 ms. Compression ratio: <2 dB variation for 15 dB MIC level change. |
Noise | MIC input, EIN = -120 dBu / 150 ohms LINE input, S / N> 75 dBA |
Dynamic Range | From Line to PGM> 90 dBA (CD quality) |
Crosstalk | PGM-REC> 70 dBA @ 1 kHz |
Distortion | From Line to PGM out <0.03% THD @ 30-15000 Hz. |
Stereo Tracking | Below 0.2 dB Error L / R in fader range 0 to 40 dB |
Telephone Hybrid Specs | 3 line active Hybrid (2 land lines + Cellular Phone with Bluetooth 4.0 high quality 16 kHz sampling) It includes a mini-PBX with blue LED silent ringer, Line attention with free hands operation (LED network), and Transfer Line Frequency Response: 300-3400 Hz Noise:> 60 dBA S / N Rejection:> 40 dB rejection Rejection adjust in front panel preset Preference atenuator: 12 dB Local speaker interrupt priority Automatic On-Air logic: Audio & Logic are managed from a single 100mm slide fader that performs all the operations in fault-free mode: ** CUE (Fader closed) with private hands free Talk ** Hold With Air return to the caller ** Live: On Air Level Control |
Telephone lightning discharge safety input | Telephone Hybrid inputs are transformer floating to meet the Public Telephone service isolation standards. Tested for lightning discharge of 2,000 volts. Protected With SIOV Varistors |
Talkback Microphone | Included Talkback MIC, with Audio Limiter. Noise Canceled PZM type. Outputs to Phone Line Hybrid or Studio Speakers & Headphones. |
VU-meters and compression level | 115 V / 230 V (rear switch selected) 50/60 Hz, 20 W |
Power | External switching power supply 90-240 V @ 50/60 Hz Power = 30W[28V@1A] |
Dimensions | DX816 = 550 (W) x 350 (D) x 130 mm high at rear and 25 mm extra flat at the front side DX822 = 700 (W) x 350 (D) x 130 mm high at rear and 25 mm extra flat at the front side Shipment box: 600 (750 in DX822) x 500 x 180 mm Shipment weight: 8 Kg |