ASK ABOUT OUR SPECIAL SHIPPING RATES ON ORDERS OVER $1000
Language
English
Features
Minimixer Specs
Inputs | 4 x MIC dynamic IN. Fader # 3 has dual input preamp for MIC 3 + Mic 4 // Level = -75 to -25 dBu USB digital input from PC at fader # 4 (when not using USB it auto-switches to Stereo Line) Telephone Line to Hybrid: For standard POT land lines. VoIP internet phone can be used with external FXS adapter, non-included Cellular Smartphone input using Bluetooth 4.0 (30-8,000 Hz full range voice quality) Stereo Line, switched between Telephone / Line or Fader # 4 auto-switch // Level -10 / + 20 dBu Insert In / Out for audio processor or external stereo devices // Level + 4 dBu |
Outputs | Stereo Program Output // Analog, unbal, + 4dBu // Max level + 14 dBu // Z > 5 Kohms USB Digital Stereo Program Out to PC MIC mixer Out for Recording at PC // -10 dBu / 10k 4 x Headphones Out (16-32-600 ohms) // Level + 5 dBu / 50 ohms Muted speakers out (replaces Headphone # 1) 12V / 120ma LED Tally Light Optional SmartCam USB out for Audicom & Close camera switching |
Intercom | Internal MIC at MiniMixer. Communication with Studio, Headphones, Telephone and Cellphone for private phone attention. Telephone keyboard for calling to phone lines without external phone sets. |
Audio Performance | Frequency response MIC to PGM Out: 20 - 20,000 Hz +/- 1 dB Plus anti-pop -3 dB @ 30 Hz Frequency response digital USB to PGM out: 20 - 20,000 Hz +/- 1 dB Noise: MIC Equivalent input noise: - 120 dBA // Line input S / N = 90 dBA Mic Compressor: Compression range 0 - 20 dB // Attac time = 5 mS // Release = 200 mS Distortion: USB Line Input to USB PGM Out <0.02% THD at 1 KHz Microphone at -50 dBu to analog PGM out <0.1% THD. |
Phone Hybrid | Frequency response 300 - 3400 Hz +/- 1dB Rejection: >40 dB at 1 kHz with Null set at rear panel Noise >60 dBA S / N |
Tally Light Out | ON-AIR signal output (turns on When MIC is open) 12 V dc @ 0.15 amp (two Solidyne On-Air Tally light) With automatic recovery Overload protected. |
Power | 4 electronic VU-meters for PGM & REC. Quasi peak reading Microphone compressor indicator 0-15 dB |
Insert External Devices | Rear connector for insertion at PGM out of audio processors or external devices at + 4 dBu level. This insertion allows connecting an external ASIO audio card USB for using at PC a VST plug-ins for effects or multi band processing |
Dimensions | Wide = 274 mm; Deep = 270 mm; Front high = 25mm; Rear High: = 71mm; Weight = 1.65 Kg Export Package: 550 mm x 310 mm x 150 mm Weight = 3 Kg |