ORBAN OPTIMOD 5950 WITH MX LIMITER, SUBHARMONIC SYNTHESIZER, MULTIPATH MITIGATOR

Features:

• Six Processing Structures: Five-Band, Low-Latency Five-Band, Ultra-Low-Latency Five-Band, Two-Band, Five-Band MX and Two- Band MX.
• Window-Gated AGC: Intelligent two-band window-gated AGC controls levels subtly and unobtrusively.
• RDS/RBDS: Onboard generator supports dynamic PS scrolling and IP access.
• Factory Presets: Like all OPTIMODs, the 5950 also comes with a variety of factory presets; Orban’s exclusive “Less-More” control simplifies creating your own signature sound.
• AES67/SMPTE ST-2110: Two redundant network interfaces are available for AES67/SMPTE ST-2110 Audio-over-IP connections.
• Remote Control/Monitoring: OPTIMOD 5950 can be configured and controlled via any HTML5 web browser. It also supports the SNMP v2 protocol. Ember+ will be added in a future release.
• “True Peak” Limiter: The “True Peak” limiter in the digital processing path anticipates and controls peak levels following D/A conversion, a feature now required by many broadcasters.
• ITU BS.412 Multiplex Power Control: The defeatable Multiplex Power Controller constrains MPX power smoothly and reliably, ensuring compliance in countries that regulate it.
• ITU-R BS.1770-4 Loudness Control facilitates compliance with modern target loudness recommendations like EBU R128.
  Diversity Delay: An adjustable delay can be inserted in the FM and/or digital path to ensure time-alignment of the FM and HD Radio/DAB+ signals at the receiver.
• Silence Detection: A programmable silence detector is available for the analog, digital and AoIP inputs. It can generate alarms and allows automatic switching to a backup input/input audio storage.
• Audience Measurement: Two internal Nielsen, Kantar or IPSOS Encoders are optionally available, allowing the FM and the DAB+/HD Radio signals to be watermarked independently.
• Streaming Monitor Output: Optionally, the processed signal can be monitored remotely via IP, allowing processor adjustment in locations where a clean off-air signal is unavailable.
• μMPX interface: The optional μMPX Interface allows you to transmit bandwidth-limited DMPX over IP.
• APTmpX Interface: The optional APTmpX Interface allows you to transmit full bandwidth DMPX over IP.
• Internal Storage for Audio Backup: An optional 2 GB Flash Memory provides two hours linear or twelve hours AAC, MP3 or OPUS encoded audio.
• Internet Stream Decoder: This optional feature can be used as a backup audio source received via Audio-over-IP.
• Dual Power Supplies: Monitored dual-redundant power supplies ensure a trouble-free 24/7 operation.
• Safety Bypass Relays: The analog, digital AES3 and the composite audio inputs and outputs have defeatable safety bypass relays that operate in case of hardware or power failures.

Specs: