Language
English
English
Español
RODE COMPLETE STUDIO KIT NT1 COMPLETE STUDIO SOLUTION KIT, INCLUDING THE NT1 MICROPHONE, AI-1 USB AUDIO INTERFACE, SMR SHOCKMOUNT AND POP SHIELD AND XLR CABLE.
SKU
ROD-NT1-AI1
MFR#
NT1+Ai1
was
$479.00
Special Price
$349.00
Availability:
Out of stock
RODE COMPLETE STUDIO KIT NT1 COMPLETE STUDIO SOLUTION KIT, INCLUDING THE NT1 MICROPHONE, AI-1 USB AUDIO INTERFACE, SMR SHOCKMOUNT AND POP SHIELD AND XLR CABLE.
An all-in-one solution for quality, low-noise vocal or instrument recording in your home studio or anywhere inspiration strikes, the Rode Complete Studio Kit combines the AI-1 desktop 1x2 USB Type-C audio interface with the NT1 large-diaphragm cardioid condenser microphone, the SM6 advanced shockmount and pop filter combo, a premium XLR cable, a USB Type-C to USB Type-A cable, and a copy of Ableton Live Lite DAW software. You just need your computer and a mic stand to get started.
Key Features
- Desktop 1x2 USB Type-C Audio Interface
- Large-Diaphragm Cardioid Condenser Mic
- Shockmount Inhibits Vibration Noise
- Pop Filter Controls Vocal Plosives
- XLR Mic Cable and USB Cable
- Cardioid Pattern Reduces Ambient Noise
- Up to 24-Bit / 96 kHz Resolution
- Built-In Discrete Headphone Amplifier
- Zero-Latency Monitoring
- Includes Ableton Live Lite DAW Software
RODE NT1-KIT Specs
| Primary Applications |
Live Sound, Studio Recording
|
| Form Factor |
Large Diaphragm Mic / Stand/Boom Mount
|
| Intended Sound Sources |
Vocals, Speech/Voice-Over, Instruments
|
| Sound Field |
Mono
|
| Element Type |
1x Condenser
|
| Diaphragm |
1" / 25.40 mm
|
| Polar Pattern |
Cardioid
|
| Orientation |
Side Address
|
| Circuitry |
Solid-State (JFET)
|
| Pad |
No
|
| High-Pass Filter |
No
|
| Frequency Range |
20 Hz to 20 kHz
|
| Maximum SPL |
132 dB SPL
|
| Impedance |
100 Ohms
|
| Sensitivity |
-29 dBV/Pa at 1 kHz
|
| Dynamic Range |
128 dB
|
| Signal-to-Noise Ratio |
90 dB A-Weighted
|
| Equivalent Noise Level |
4.5 dB A-Weighted
|
| Analog Output |
1x XLR 3-Pin Male (on Mic)
|
RODE AI-1 USB-C Audio Interface Specs
| Channels of I/O |
1 Input / 2 Output
|
| Built-In DSP |
No
|
| Maximum Sampling Rate |
96 kHz / 24-Bit
|
| Number of Microphone Inputs |
1
|
| Built-In Microphone |
No
|
| Input Level Adjustment |
2x Knob
|
| Expansion Slots |
No
|
| Pad |
No
|
| Gain/Trim Range |
Inputs:
0 to 45 dB |
| High-Pass Filter |
No
|
| Solo/Mute |
No
|
| Analog Audio I/O |
1x Combo XLR-1/4" TRS Mic/Line Input
2x 1/4" TRS Balanced Line Output 1x 1/4" TRS Headphone Output |
| Phantom Power |
48 V
|
| Digital Audio I/O |
No
|
| Host Connection |
USB-C
|
| Host Connection Protocol |
Not Specified by Manufacturer
|
| USB (Non-Host) |
No
|
| Sync I/O |
No
|
| Network I/O |
No
|
| MIDI I/O |
No
|
| Wireless |
No
|
| Frequency Response |
20 Hz to 20 kHz ±1 dB
|
| Maximum Output Level |
Monitor Outputs:
-6 dBu |
| Headphone Output Power |
24 mW into 32 Ohms
245 mW into 300 Ohms |
| Impedance |
Hi-Z Inputs:
0.9 Megohm Mic Inputs: 1.3 Kilohms |
| Dynamic Range |
104 dBu
|
| EIN |
-128 dBA
|
| Sample Rates |
44.1 / 48 / 88.2 / 96 kHz
|
| Sample Rate Conversion |
No
|
| Bit Depths |
24-Bit
|
| Latency |
Zero-Latency Direct Monitoring
|
| Sync Sources |
No
|
| Clocking |
Internal:
|
| Media/Memory Card Slot |
No
|
| OS Compatibility |
macOS 10.10 or Later
Windows 7 or Later |
| Mobile App Compatible |
No
|
| Power Requirements |
USB Bus Power
|
| Dimensions |
4.9 x 3.9 x 1.5" / 124 x 100 x 38 mm
|
| Weight |
19.8 oz / 561.3 g
|
