ASK ABOUT OUR SPECIAL SHIPPING RATES ON ORDERS OVER $1000
Language
English
Audio Processor Specs
Inputs | 1-XLR3 connector, level self-adjusted 0 dBu to + 15 dBu 600 ohms balanced. 2-RCA unbal, level self adjusted -15 to 0 dBu, 10K. 3-RJ45 stereo balanced (compatible with StudioHUB, Axia, etc) 0 dBu to + 15 dBu, 600 ohms balanced. All with R internal > 10 Kohms 4-Optional digital stereo USB input for PC direct connection |
Outputs | 1-Analog Balanced, +4 dBu; Z= 600 / 10 Kohms, with de-emphasis (flat response) 2-Optional USB digital stereo input (flat response) for direct connection to PC |
Frequency Response | 20 – 16,000Hz +/- 0.5dB Measured below compression & limiter threshold. |
Harmonic Distortion | Below 0.02% @ 30-15,000Hz |
Noise | Below – 90 dBA ref 100% modulation |
Stereo Separation | > 75 dBA |
Subsonic Filter | Chebyshev 2th order, 15 Hz |
Asymmetry Canceling | 5:1 voice asymmetry reduction, using Khann-Bonello algorithm. |
Expander | 5 bands low level expander |
AGC (wide band) | VCA controlled, 30 dB range, 3 sec attack/release |
Multiband Compressors | 3 bands, 18 dB/octave, Linear Phase crossover, Compressors: 30 dB range, 5:1 slope, VCA controlled, Automatic attack time, Release time user controlled by 3 x ENERGY controls |
IM Canceled - Clipper | IM clipper cancellation > 30 dB below 250 hz |
Dynamic EQ | 0 – 12 dB dynamic boost at Low, Mid and High Frequency Front panel user controlled |
Proccesing | 7 stages of processing devices |
Power | 115 V / 230 V (rear switch selected) 50/60 Hz, 20 W |
Dimensions | 19″ rack mount. Module one (44.4 mm) // weight 3 Kg Net; (4 Kg for courier freight) |
Stereo Coder – Digital with 16x oversampling (608 kHz)
Audio input | 2 Vpp for 100 % MPX output (4 Vpp) |
MPX output | Two MPX outputs with individual level control with preset at rear side Differential output, BNC connector, floating ground 50 ohms. Allows 45dB canceling buzz & noise due to ground loops Level of each output adjustable from 0.5 to 4 Vpp 600/10 kohms |
Frequency Response | 20-15000 +/- 0.2 dB, plus 15 Khz/5 order elliptic, Active FDNR, LP filter Attenuation at 19 kHz> 50 dB |
Harmonic Distortion | From 30-12.000 Hz, below 0,005% Measured using Belar Digital Stereo decoder DSD-1A and Tektronix 5L4 N Spectrum Analyzer. |
Signal to Noise ratio | Better than 90 dBA with reference to 100% modulation Measured using Belar Digital Stereo decoder model DSD-1A. |
Stereo Separation | > 65 dB at 1kHz |
38 Khz suppression | Below - 70 dB Ref 100% modulation |
57, 76 & 95 Khz suppression | Below - 75 dB Ref 100% modulation |
Pilot tone stability | +/- 0.002% (+/- 0.5 Hz) |