Language
English
English
Español
SOLIDYNE HL202 TWO LINES HYBRID SYSTEM FOR CONFERENCE (LAND LINES OR CELLULAR PHONES)
SKU
SOLHL202
MFR#
HL202
$490.00
Availability:
In stock
SOLIDYNE HL-202 Solidyne 2 Lines Phone Hybrid, with expansion to 4 or 6 lines
Solidyne's automated hybrid operated with just three buttons. HL202: telephone hybrid for 2, 4 and 6 lines. The HL-202 telephone hybrids control two telephone or cellular lines, indistinctly. These units synthesize our 45 years of experience in the manufacture of telephone hybrids for broadcasting.
This translates into a system where excellence is placed in the design, facilitating the operator's work. The sending and receiving have audio limiters and compressors, as well as band-pass filters, to automatically adjust levels and avoid saturation of telephone lines that occur with other brands.
Key Features
- 2, 4 and 6 lines or cell phones in conference
- 40 dB of local signal rejection
- Simple operation with only 3 buttons
- Output to console, with audio compressor, balanced +4 dBu
- Send to line with automatic level adjustment to 0 dBu
- Shipping bandpass filters to improve local rejection
- 8 dB crossover gain between lines to level the entire conference
- Illuminated reflective keypads
- Balanced and floating phone connection, to cancel hum
- Lightning protection with SIOV technology
- High audio quality over the air, no local signal coloration
Specifications
Lines: |
|
|
|
2, 4 & 6 phone or cellular lines. |
|
|
Full conference with 8 dB cross gain. |
Technology: |
|
|
|
Active Hybrid with send and return gain, auto-adjusted by audio limiter and AGC. Balanced telephone lines floating with ground isolation by Nickel-Ferrite transformers. |
AGC Output level: |
|
|
|
Constant level to console, independent from line level due to the action of the internal AGC. A 15 dB phone level change causes less than 3 dB change at the Output |
|
|
Output level control on the front panel. Nominal level +4 dBu, variable between -60 / +8 dBu |
Return Level: |
|
|
|
Audio limiter & AGC to operate with signals from -5 to + 8 dBu |
|
|
Return Level at phone line 2 V pp equivalent to 0 dBm |
Audio Return Filters: |
|
|
|
Band-Pass filters in return channel, limits response to 400 - 2,200 Hz to eliminate on-air sound coloration. |
Priority System: |
|
|
|
The speaker have priority to interrupt, causing an attenuation of 12 dB on the caller. |
Return Level at phone line: |
|
|
|
0 dBm (2 Vpp) |
Hybrid Output Response: |
|
|
|
250 - 3,400 hz +/- 1 dB |
Impedance: |
|
|
|
600 Ohms |
Hybrid Gain: |
|
|
|
Self-adjusted between 12 and 30 dB, according to the line level. |
Distortion, THD: |
|
|
|
Below 0.2% at the balanced output @ 1 Khz, + 4 dBm level |
Noise Level: |
|
|
|
S / N better than 70 dBA, measured with artificial phone line of 2 km |
Hybrid Reject: |
|
|
|
More than 40 dB |
|
|
at 1 Khz. Measured with 2 km artificial phone line |
Reject Adjustment: |
|
|
|
15 turns, Multi-turns preset on each line. Adjust it only at installation |
Lines Isolation: |
|
|
|
Independents inputs, balanced and floating with transformer Isolation 250 V / AC |
Overload Safety: |
|
|
|
2 KVolt protection against lightning discharge using SIOV technology |
|
|
Tested using the Siemens / Ramatel 44.04 recommendation |
Power: |
|
|
|
200-240 V / 100- 130 V |
|
|
50/60 Hz, 5 VA |
Dimensions: |
|
|
|
Rack mounting 19 ″ |
|
|
1 U (44mm) |
✓ 1 Solidyne hybrid model HL202.
✓ 1 Power cable.
✓ 1 Owner's Manual.
✓ 1 Warranty card.
✓ 1 link cable (to link units).
✓ 2 “L†supports for rack mounting.
✓ 2 RJ-11 telephonic wires.
✓ 4 Self-adhesive rubber pads.
✓ 1 Power cable.
✓ 1 Owner's Manual.
✓ 1 Warranty card.
✓ 1 link cable (to link units).
✓ 2 “L†supports for rack mounting.
✓ 2 RJ-11 telephonic wires.
✓ 4 Self-adhesive rubber pads.