Language
English
English
Español
TASCAM MX-8A 8 IN/ 8 OUT MATRIX MIXER W/ DSP PROCESSING
SKU
TAS-MX-8A
MFR#
MX-8A
was
$1,399.00
Special Price
$1,099.00
Availability:
Out of stock
TASCAM MX-8A 8 IN/ 8 OUT MATRIX MIXER W/ DSP PROCESSING
The MX-8A 8-Input / 8-Output Matrix Mixer with DSP from Tascam features eight mic/line inputs and eight-line outputs on Euroblock connectors as well as integrated DSP for audio optimization in various environments and configurations. It can be used to mix mic and playback-equipment audio signals into eight different zones for easy setup and adjustment by both system integrators and end users, making it suitable for stores, restaurants, or banquet rooms.
Key Features
- Microphone/Line Input Switching
- 48V Phantom Power
- Mic Input Pad
- Microphone Gain
- Compressor
- 4-Band EQ
- Auto Level Control
- Mute, Fader, Grouping
Specs
| Format |
44.1 kHz / 48 kHz, 16-Bit / 24-Bit
|
| Connector |
4-Pin USB b-Type
|
| Transfer Rate |
USB 2.0 High-Speed (480 Mbps)
|
| Analog In |
Connector: Euroblock (Balanced) 3.81 mm Pitch
|
| Minimum Input Level |
-70 dBu
|
| Maximum Input Levels |
Microphone: +26 dBu
Line: +24 dBu Input Impedance: 2.2 kOhms or Higher |
| Analog Output |
Connector: Euroblock (Balanced) 3.81 mm Pitch
|
| Nominal Output Level |
+4dBu (When Ref.Level Set to Other Than -9 dBFS)
+6dBu (When Ref.Level Set to -9 dBFS) |
| Maximum Output Level |
Switchable:
+15 dBu (Ref.Level: -9 dBFS) +18 dBu (Ref.Level: -14 dBFS) +20 dBu (Ref.Level: -16 dBFS) +22 dBu (Ref.Level: -18 dBFS) +24 dBu (Ref.Level: -20 dBFS) |
| Output Impedance |
200 Ohms or Lower
|
| RS-485 |
Connector: RJ-45
Cables: Category 5e or Faster STP Cables |
| Ethernet |
Connector: RJ-45
Transmission Protocol: TCP/IP Ethernet Standard: 100BASE-TX Cables: Category 5e or Faster STP Cables |
| Power |
AC 100 to 240 V, 50/60 Hz
|
| Power Consumption |
21 W
|
| Operating Temperature Range |
32 to 104°F / 0 to 40°C
|
| Dimensions |
19.0 x 1.8 x 12.0" / 48.3 x 4.5 x 30.4 cm
|
| Weight |
6.6 lb / 3.0 kg
|
