Language
English
English
Español
TASCAM SERIES 8P DYNA 8-CHANNEL MIC PREAMPLIFIER W/COMP
SKU
TAS-SERIES-8p-DYNA
MFR#
SERIES 8P DYNA
was
$799.99
Special Price
$599.00
Availability:
Out of stock
TASCAM SERIES 8P DYNA 8-CHANNEL MIC PREAMPLIFIER W/COMP
Designed for studio and stage use, the TASCAM SERIES 8p Dyna is a 1 RU rackmountable mic preamp with selectable analog compression on each channel, as well as low-noise preamps, dual S/MUX optical ports, and selectable +48V phantom power on a per-channel basis. Because of this, you can use the unit as an expansion device for S/MUX equipped interfaces, as a front-end for DANTE setups, or as a standalone front end.
Key Features
- Mic, Instrument & Line Inputs
- For Recording or Live Use
- 8 x Mic Preamps with Analog Compression
- Selectable +48V Phantom Power
- 8 x Mic/Line Inputs, 2 x Instrument Ins
- 8 x 1/4" TRS Line Outputs
- 1 x DB25 Output
- Optical S/MUX & ADAT
- Wordclock I/O via BNC Sockets
- Includes Power Supply
Specs
| Sampling Frequency |
44.1, 48, 88.2, 96, 176.4, and 192 kHz
|
| Bit Rate |
24-Bit
|
| Input Connections |
8 x XLR-1/4" Combination Jacks
|
| Input Impedance |
Mic Input: 2.3 Kilohms
Instrument Input: 1 Megohm or More Line Input: 10 Kilohms |
| Input Gain |
Mic: -58 dBu (Minimum), -6 dBu (Maximum)
Instrument: -58 dBV (Minimum), -6 dBV (Maximum) Line: -48 dBu (Minimum), +4 dBu (Maximum) |
| Gain Range |
52 dB
|
| Maximum Input Level |
Mic: +10 dBu
Instrument: +10 dBV Line: -+24 dBu |
| Output Connections |
8 x 1/4" TRS Line Outputs, Balanced
1 x DB25 Connector |
| Output Impedance |
Analog Output: 100 Ohms or Less
Line Output: 230 Ohms or Less Load Impedance: 2 kOhms or More |
| Output Level |
Nominal: +4 dBu
Maximum +20 dBu |
| Digital Audio Connectors |
Optical I/O, Multichannel Optical Format, Supports S/MUX2 at 88.2 and 96 kHz, S/MUX4 at 176.4 and 192 kHz
|
| Word Clock I/O |
I/O: 2 x BNC Sockets
|
| Voltage |
Clock Input: 2.0 to 5.0 V p-p
Clock Output: 2.0 V p-p into 75 Ohms |
| Impedance |
Input: 75 Ohms ±10% with Terminal On/Off Switch
Output: 75Ω ±10% with OUT/THRU Switch |
| Sampling Frequency |
44.1 48, 88.2, 96, 176.4, and 192 kHz
|
| EIN |
Mic Amp: -127 dBu or Lower
|
| Frequency Response |
Mic/Line to Line Output
20 Hz to 40 kHz, ±0.5 dB 40 kHz 80 kHz ±5 dB Mic/Line (Analog) to Digital Output (S/MUX) Fs 44.1/48 kHz: 20 Hz to 20 kHz ±0.5 dB Fs 88.2/96 kHz: 20 Hz to 40 kHz ±0.5 dB Fs 176.4/192 kHz: 20 Hz to 80 kHz ±5 dB |
| Signal to Noise Ratio |
Mic/Line/Instrument Input to Line Output: 116 dB
Mic/Line/Instrument Input to Digital Output (S/MUX): 113 dB at FS 44.1 kHz and 48 kHz; 111 dB at Fs 96 kHz |
| THD |
Mic/Line to Line Output: 0.0007%
Instrument to Line Output: 0.0009% Mic/Line/Instrument to Digital Output (S/MUX): 0.001% |
| Crosstalk |
Mic to Line Output: 119 dB
Mic to Digital Output (S/MUX): 114 dB |
| Power |
12 VDC (Dedicated AC Adapter)
|
| Power Consumption |
16 W
|
| Operating Temperature |
32 to 104°F / 0 to 40°C
|
| Dimensions |
19 x 1.8 x 9" / 48.2 x 4.4 x 22.8 cm
|
| Weight |
5.7 lb / 2.6 kg
|
