AJA KI-PRO-GO MULTI-CHANNEL HD H.264 USB 3.0 RECORDER AND PLAYER (STORAGE NOT INCLUDED )
Continuing the proven Ki Pro lineup, the portable AJA Ki Pro GO provides up to four channels of simultaneous HD/SD recording plus one backup to widely available USB drives. This rack-mountable unit's four 3G-SDI and four HDMI inputs record up to 1080p60 video. The inputs are genlock-free, suiting them for use with a variety of SDI, DSLR, mirrorless, and HDMI cameras. Firmware update v1.5 offers timecode via SDI input with support for both time-of-day and timecode values. This update also improves overall stability, removes the 240-minute recording limit, and enables user-selectable primary and backup recording destinations.
AJA Ki Pro GOSpecs
| Video I/O |
4x BNC (3G-SDI) Input
5x BNC (3G-SDI) Output 4x HDMI 1.4a Input 1x HDMI 1.4a Output |
| Embedded Audio |
HDMI: 2-Channel
SDI: 2-Channel |
| Audio I/O |
2x XLR Input
2x RCA Monitor Output 1x 1/8" / 3.5 mm Headphone Output |
| Power I/O |
2x XLR 4-Pin Input
|
| Other I/O |
1x RJ45 (LAN)
|
| Media/Memory Card Slot |
No
|
| File System Support |
exFAT
|
| Video Format |
HDMI (8/10-Bit 4:4:4 RGB)
1080p: 60/59.94/50/30/29.97/25/24/23.98 1080i: 60/59.94/50 1080PsF: 30/29.97/25/24/23.98 720p: 60/59.94/50 576i: 50 480i: 59.94 |
| Video Signal Conversion |
HDMI to SDI
1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 |
| Timecode Support |
Yes
|
| Pulldown Conversion |
No
|
| Camera Trigger |
No
|
| Pre-Roll Record |
No
|
| Encoding Formats |
Up to 1920 x 1080
H.264 8/10-Bit 4:4:4 H.264 8/10/12-Bit 4:2:2 H.264 8-Bit 4:2:0 |
| Maximum Audio Tracks |
2
|
| Reference Input |
Looping (Non-Terminating), Tri-Level Sync
|
| Phantom Power |
No
|
| Input Power |
100 to 240 VAC, 50 / 60 Hz
12 to 18 VDC |
| Battery Type |
No
|
| Operating Current |
7.5 A
|
| Power Consumption |
55 W (Typical)
|