Rugged, light-weight and ergonomically designed Clear-Com's RS-702 is a two-channel analog beltpack that can carry power and audio through the XLR-6 line connector. Each beltpack combines high headroom, low-noise audio and shaped frequency contour (the “Clear-Com Sound”) to deliver clear audio.
WIth an improved design, the RS-702 comes in a reliable casing with a retro-design connection to the previous RS-500 Series beltpacks. A belt clip allows a variety of ways to use the beltpack; users can clip it to a belt or lanyard, or users can mount the belt clip to a wall, pole or desk for fixed installations.
Compatible with all Encore partyline products, as well as the PL-Pro line and other partyline systems via Encore interfaces, the RS-702 incorporates LEDs on the top of the beltpack for visual indication of incoming and outgoing call signaling. A mic preamp enables intelligible voice communication for every volume level. Recessed rotary volume control, Talk and Call keys guard against accidental activation. The RS-702 has low operating current to allow for more beltpacks in a daisy-chain. Additionally, a thumbwheel level adjustment is available for Program In.
Features:
Specifications:
| Microphone Pre-Amplifier | |
| Frequency Response (Mic to Line) | 280 – 15,000 Hz ± 3 dB |
| Output Level (-50 dBm Electret Input) | -9 dBm |
| Distortion | < 0.1% |
| Signal to Noise Ratio | > 65 dB |
| Clear-Com Sound | Yes |
| Headphone Amplifier | |
| Frequency Response (Line to Headphone) | 150 – 20,000 Hz ± 3 dB |
| Output Level (-9 dBm Electret Input) | 7 dBm |
| Distortion | < 0.5% |
| Signal to Noise Ratio | > 50 dB |
| Earphone to Mic Crosstalk | > 80 dB |
| Sidetone Adjustment Range | > 45 dB (at -80 dB mic input) |
| Keypad Indicators | |
| Power | Green LED |
| Talk A and B | Green LED |
| Call A and B | Orange LED |
| Connectors | |
| Intercom Line | 2x 6-pin XLR-M/F (Switchcraft pin layout) |
| Intercom Line Pinout | Pin 1: CommonPin 2: PL Power (+28 V DC)Pin 3: PL Ch-BPin 4: PL Ch-APin 5: Program Audio +Pin 6: Program Audio -Note: Each intercom channel should be an individually shielded pair |
| Headset | 4-pin XLR-M |
| Headset Pinout | Pin 1: Mic - (Common)Pin 2: Mic +Pin 3: Spkr -Pin 4: Spkr + / 0.5×VCC |
| Power | |
| Input Voltage Range | 12 – 30 V DC |
| Input Current (Idle) | ≤ 25 mA |
| Input Current (Max) | ≤ 40 mA |
| Call Voltage | |
| Nominal Call Voltage | 16.5 V DC |
| Minimum Operating Voltage | 3.3 V DC |
| Environmental | |
| Operating Temperature Range | 32° – 158°F (0° – 70°C) |
| Relative Humidity | 0 – 90%, non-condensing |
| Dimensions | 3.4 x 4.5 x 1.7 in (HxWxD)86 x 114 x 43 mm |
| Weight | 10.5 oz (0.30 kg) |