RODE VIDEOMIC ME-L DIRECTIONAL MICROPHONE AND HEADPHONE OUTPUT FOR IPHONE AND IPAD WITH LIGHTNING CONNECTIVITY
The Rode VideoMic Me-L is a directional microphone designed to operate with iOS devices, including iPhones and iPads. It provides a marked sonic improvement to video recordings, especially when compared to your iOS device's built-in microphone. A frequency response of 20 Hz to 20 kHz gives you a wide audible range, while an SPL of 115 dB allows you to record louder sounds without distortion. Being cardioid in polar pattern, the microphone exhibits a directionality that focuses the sound wherever you're pointing the device, providing a measure of rejection to any audio hitting the sides of the mic.
The Rode VideomicMe-L mic plugs directly into your iOS device by means of its lightning connector, though a 3.5mm jack is on hand for direct monitoring through headphones. Thus, you can always ensure you're getting good sound, either while recording or during playback. A mic clip is included to secure the mic to your iOS device, and an included furry windshield makes capturing audio in breezy outdoor locales less of a deal breaker.
Key Features:
RODE VMML Specs
| Acoustic Principle | Pressure-gradient electret condenser |
| Polar Pattern | Cardioid |
| Frequency Range | 20 Hz to 20 kHz |
| Signal to Noise Ratio | 74.5 dB |
| Equivalent Noise | 19.5 dBA SPL (as per IEC651) |
| Maximum SPL | 15 dB SPL (1 kHz at 1 m) |
| Power Requirements | Powered by iOS device, bus-powered |
| Output Connection | Lightning, 3.5 mm TRS |
| Analog Outputs | 3.5 mm TRS headphone jack for direct monitoring |
| Computer Connectivity | Lightning connector |
| I/O | 1 in, 2 out |
| Bit Depth | 24-bit |
| Sample Rates | 44.1 and 48 kHz |
| OS Requirements | iOS 11 and later |
| Material of Construction | Aluminum |
| Dimensions (L x W x H) | 2.9 x 0.8 x 1.0" / 73.5 x 20.2 x 25.7 mm |
| Weight | 1.0 oz / 28.0 g |