SENNHEISER MKH-418S STEREO SHOTGUN RF MICROPHONE (DIRECTIONAL/BIDIRECTIONAL (M/S ARRANGEMENT), CONDENSER) WITH 48 V PHANTOM POWER AND 5-PIN XLR-M. AC 418-Y CABLE (REQUIRED) AVAILABLE SEPARATELY (7.8
The Sennheiser MKH 418S professional stereo shotgun microphone incorporates the Mid / Side (M/S) technique, yielding a high degree of directivity and focus while reproducing signals with extreme accuracy to their perspective placement, within the Left / Right Stereo field.
The MKH 418S features 2 independent acoustic systems for generating the mid and side signals. The mid (M), or mono signal is generated using an internal shotgun microphone. With its frequency range of 40 Hz to 20 kHz, the shotgun accurately reproduces audio with extreme focus, emphasizing pick up of signals at the direct-axis section (front). The shotgun also rejects signal at the off-axis sections (sides) of the microphone, minimizing noise and further strengthening the pick up area. The Side (S), or stereo signal is generated using a separate, internal microphone system that features a figure-of-eight polar pattern. This system is responsible for reproducing the spacial character needed for accurate placement of signal within the stereo field. It can also handle 130 dB of SPL.
Sennheiser MKH 418-S Specs
| Primary Applications |
Audio for Video, Location Sound, Field Recording
|
| Microphone Type |
Shotgun
|
| Intended Sound Sources |
Vocals
|
| Sound Field |
Mono / Stereo
|
| Element Type |
2x Condenser
|
| Polar Pattern |
Figure-8 / Supercardioid / Lobar
|
| Orientation |
End Address
|
| Circuitry |
Solid-State
|
| Pad |
No
|
| High-Pass Filter |
No
|
| Gain Adjustment |
No
|
| Frequency Range |
40 Hz to 20,000 Hz
|
| Maximum SPL |
130 dB SPL
|
| Sensitivity |
25 mV/Pa / 10 mV/Pa (1 kHz)
|
| Equivalent Noise Level |
Supercardioid: 14 dB A-Weighted
Figure-8: 22 dB A-Weighted |
| Analog Output |
1x XLR 5-Pin Male
|
| Power Sources |
Phantom Power
|
| Operating Voltage |
48 V
|