ASK ABOUT OUR SPECIAL SHIPPING RATES ON ORDERS OVER $1000
Language
English
Features:
Fully DSP based core
Built-in Oscilloscope allowing Left, Right and MPX display
MPX Power measurement with data history
RF Spectrum analyzer allowing to check the RF Carrier parameters
MPX Spectrum analyzer for Left, Right and MPX measurements
Selectable De-emphasis – 50µs and 75µs
Built-in Stereo Decoder; Stereo Presence Detection
Date & Time Settings with various formats
LAN port for full TCP/IP remote control and monitoring
Up to 90dBµV direct RF Antenna Input
Adjustable alarms for RF, Deviation, Pilot and RDS signal
Firmware update for future-proof operation
Parameters Factory Restore Option
FM Band 87 - 108 MHz Basic Spectrum Analyzer
MPX, PILOT & RDS deviation meters
LEFT and RIGHT demodulated audio level meters
Headphones audio output
RDS and RBDS decoder with BER meter
Intuitive Application Interface
Alarm dispatch via E-mail, SMS, SNMP
Channel status reporting via SMS
RF and RDS Measurements
Remote Listening via optional GSM modem
Real Time Audio Program Streaming
Attractive price and very good price-performance ratio
Very Intuitive Embedded WEB server for interactive supervision
Proved and reliable hardware for 24/7/365 operating
Easy Installation and Setup
SNTP for automatic synchronization of the built-in clock
Compact and Robust Aluminum Case for high RF immunity
Specifications:
RF INPUT |
|
Frequency Range |
87.0 to 108 MHz, Frequency Agile |
Step Increment |
50 kHz |
Antenna Input |
50 Ω, BNC Connector, 10 dBµV sensitivity |
Internal Attenuator |
0, 10, 20 and 30dB, auto |
Dynamic Range |
0 dBµV to 100 dBµV |
S/N |
57dB, RF > 60dBµV, 30dB, RF > 10dBµV |
METERING RESOLUTION & ACCURACY |
|
RF Level |
0 to 95 dBµV; resolution - 0.1 dBµV; accuracy - ±1 dB (10 to 85 dBµV) |
Multipath |
0 to 100%; accuracy - ±1% |
MPX Deviation |
±120 kHz; resolution - 0.1kHz; accuracy - ±10%, ±5% typically |
MPX Power |
±12 dBr; resolution - 0.1dBr, 10 sec. integration; accuracy - ±0.2 dBr |
Audio Level |
-50 to +5dB; resolution - 0.1dB; accuracy - ±5% |
Pilot Level |
0 to 12 kHz; resolution - 0.1 kHz; accuracy - ±0.5 kHz, 1 to 12 kHz |
RDS Level |
0 to 9 kHz; resolution - 0.1 kHz; accuracy - ±10% typical and not guaranteed |
Audio, MPX, Pilot, RDS levels |
|
Validity |
RF level preferably > 50dBµV |
Multiplex Level |
Peak level, 256 ksamples over 1 sec. |
Audio Level |
Peak level, 64 ksamples over 1 sec. |
Pilot Level |
Mean peak level, 256 ksamples over 1 sec. |
RDS Level |
Mean peak level, 256 ksamples over 1 sec. |
STEREO DECODER |
|
Stereo Separation |
>25dB, typical >30dB |
De-emphasis |
50 or 75µs, Selectable |
THD |
0.5% |
OUTPUTS |
|
Audio stream |
Icecast/Shoutcast compatible audio stream |
Alarms |
E-mail, SMS, SNMP |
Headphone |
1/8" (3.5mm) Phone Jack |
GSM Modem |
15-pin Male D-Sub Connector |
RDS DATA DECODING |
|
Standards |
European RDS CENELEC; United States RBDS NRSC |
Error Correction & Counting |
Yes |
AF Decoding |
Yes |
CT (Time/Date) |
Yes |
PI, PTY, DI, MS |
Yes |
TA/TP |
Yes |
RT (Radio Text) |
Yes |
PS (Program Service name) |
Yes |
FFT SPECTRUM ANALYSIS |
|
Input |
Composite MPX, Audio |
Dynamic Range |
80 dB |
FFT Length |
1024 |
Sampling Rate |
256 kHz - Composite, 64 kHz - Audio |
SCOPE ANALYSIS |
|
Input |
Composite MPX, Audio |
Trigger Mode |
Auto, Fall |
Dynamic Range |
±120 kHz |
Sampling Rate |
256 kHz - Composite, 64 kHz - Audio |
USER INTERFACE |
|
Web interface |
Full monitoring and control; Interactive and easy to use |
Indicators |
3 LEDs (on front panel) |
Headphone Output |
1/8" (3.5mm) phone jack (on front panel) |
TCP/IP COMMUNICATION |
|
Type |
Ethernet 10/100M Base-T Port |
Connector |
RJ45 (on rear panel) |
OPERATING CONDITIONS |
|
Temperature |
10° to 60°C |
EMC Immunity |
6V/m |
POWER |
|
Voltage |
External, 12V/1A |
Power Consumption |
12VA |
SIZE AND WEIGHT |
|
Dimensions (W;H;D) |
125 x 31 x 160 mm |
Shipping Weight |
270 x 54 x 230 mm / 1.054 kg |
HS Code |
8527212000 |