POWERCLAMP Series 80 wire-in PARALLEL TVSS devices are ideally suited for broadcast studios, A/V
installations, repeater and transmitter sites, computer/servers, and other mission-critical facilities that have
low to moderate exposure to lightning and other extreme transients. They are rated at 80,000 surge amps per
phase and will prevent power line spikes from damaging audio/video, data, and other sensitive equipment. Their
superior surge suppression will greatly improve system reliability and prevent the failures that are caused by power
line disturbances. Operation is not affected by the power requirements of the load. Each line phase is fused, with a
fuse status LED. An unlikely failure will not interrupt power to the load. POWERCLAMP Series 80 units should be
installed at sub-panels or on branch circuits with upstream (main panel) protection. The Series 80 can also be used
at the main entry panel in residential applications. The UL listed enclosure is rated for indoor or outdoor installation.