Language
English
English
Español
RVR TEX502LCD/S-TLW 0-500 WATTS FM TRANSMITTER , DIGITAL GRAPHIC DISPLAY. MICROPROCESSOR CONTROLLED, STEREO CODEC AND WEB INTERPHASE TELEMETRY BUILT-IN.
SKU
TEX502LCD/S-TLW
MFR#
TEX502LCD/S-TLW
$6,160.00
Availability:
Out of stock
After decades of uninterrupted success our TEX Series remains the most installed transmitter worldwide in any type of radio station.
Cabable of working as well under extreme conditions, the wide range of powers available, combined with high reliability and power efficiency make these models the perfect solution for those looking for high quality at a very attractive price. These compact units can be used as a stand-alone all-in-one transmitters or as exciters in modular solutions.
Worldwide best seller since 1979.
High quality and rock solid at unbeatable value for money.
Full compliance with EC, FCC and CCIR standards.
Standard Frequency Range: 87.5 - 108 MHz. Other bands on request.
Low distortion and intermodulation values.
10% - 100% Output Power continuously adjustable.
APC Automatic Power Control ensuring reliable operation.
Enhanced energy saving power supply.
Inputs: Analogue Stereo L&R, Mono, MPX. AES/EBU (option).
Auxiliary input for SCA / RDS signals.
RDS encoder with basic or advances features (option).
WEB, SNMP2, GSM, Serial remote controls (option)
Features
PRIMARY APPLICATION: high quality at a very attractive price. Ideal for use as transmitters in stand-alone applications. Adjustable power output from 10 to 100%.
HARDWARE FEATURES: compact, non-deformable and light thanks to the stainless steel chassis, in 2 rack units only.
USER-FRIENDLY FEATURES: universal 80-260 V multi-voltage power supply enables operation without preselect voltage. Four pushbuttons for user/device interaction and software that offers a simple, intuitive interface.
RELIABILITY/CONTINUITY: APC (Automatic Power Control) and Foldback protection ensure reliable operation under any operating conditions.
AUDIO PERFORMANCE: low distortion and intermodulation values and a high noise/signal ratio.
OPERATING EFFICIENCY: incorporate a PFC (Power Factor Corrector) power supply, that provides the utmost efficiency for enhanced energy saving and environmental protection, which added to LD-MOSFET technology ensure high efficiency, better than 70% across the bandwidth.
EASE OF MAINTENANCE: advanced module engineering ensures extreme of access and simple maintenance.
INTERFACE CONTROL: total control thanks to microprocessor easily programmed from menu with all key parameters displayed on LCD.
INPUT/OUTPUT INTERFACE: built-in high-performance stereo coder, L&R analogue audio inputs, Mono inputs, MPX composite signal and auxiliary inputs for SCA / RDS signals.
RDS APPLICATION: built-in RDS encoder with UECP standard functions (option).
REMOTE CONTROL: built-in telemetry system via GSM modem, battery and battery charger or via WEB or via SNMP (option).
REGULATORY COMPLIANCE: state-of-the-art technology in full compliance with EC, FCC and CCIR standards.
Specifications
|
TEX502LCD |
||||
|
Parameters |
|
U.M. |
Value |
Notes |
|
GENERALS |
|
|
|
|
|
Frequency range |
|
MHz |
87,5 ÷ 108 |
|
|
Rated output power |
|
W |
500 |
Continuously adjustable from 10 to 100% |
|
Modulation type |
|
|
F3E Direct carrier frequency |
|
|
Operational mode |
|
|
Mono, Stereo, Multiplex |
|
|
Working temperature |
|
°C |
-5 to +50 |
|
|
Working humidity |
|
% |
95 |
Without condensing |
|
Working altitude |
|
mt |
Up to 3000 * |
* With adequate air evacuation system in site |
|
Frequency setting |
|
kHz |
10 |
Steps |
|
Frequency stability |
Temperature range from -5°C to 50°C |
ppm |
±1 |
|
|
Modulation capability |
Refered @ 0dBu for 75kHz |
kHz |
150 Stereo, 180 Mono/MPX |
Meets or exceeds all FCC and CCIR rules |
|
Pre-emphasis |
|
µS |
0, 50 (CCIR), 75 (FCC) |
Selectable |
|
POWER REQUIREMENTS |
|
|
|
|
|
AC Power input |
AC Supply Voltage |
VAC |
80 ÷ 260 |
|
|
|
AC Apparent Power Consumption |
VA |
653 |
|
|
|
Active Power Consumption |
W |
650 |
|
|
|
Power Factor |
|
0,998 |
|
|
|
Overall Efficiency |
% |
Typical 70 |
|
|
|
Connector |
|
VDE IEC Standard |
|
|
MECHANICAL DIMENSIONS |
|
|
|
|
|
Phisical dimensions |
Front panel width |
mm / inch |
483 / 19 |
EIA rack |
|
|
Front panel height |
mm / inch |
88 / 3 1/2 |
2HE |
|
|
Overall depth |
mm |
394 |
|
|
|
Chassis depth |
mm |
372 |
|
|
Weight |
|
kg |
About 9,5 |
|
|
Cooling |
|
|
Forced, with internal fan |
|
|
Acoustic noise |
|
dBA |
< 75 |
|
|
AUDIO INPUTS |
|
|
|
|
|
Left / Mono |
Connector |
|
XLR F |
|
|
|
Type |
|
Balanced |
|
|
|
Impedance |
Ohm |
10 k or 600 |
|
|
|
Input Level /Adjust |
dBu |
-13 to +13 |
Continuosly adjustable |
|
Right |
Connector |
|
XLR F |
|
|
|
Type |
|
Balanced |
|
|
|
Impedance |
Ohm |
10 k or 600 |
|
|
|
Input Level |
dBu |
-13 to +13 |
Continuosly adjustable |
|
MPX |
Connector |
|
BNC |
|
|
|
Type |
|
Unbalanced |
|
|
|
Impedance |
Ohm |
10 k or 50 |
|
|
|
Input Level /Adjust |
dBu |
-13 to +13 |
For 7,5 KHz FM, adjustable |
|
SCA/RDS |
Connector |
|
2xBNC |
|
|
|
Type |
|
Unbalanced |
|
|
|
Impedance |
Ohm |
10 k |
|
|
|
Subcarier Level @ 0 dBu |
dB |
-17 to -40 |
For 7,5 KHz FM, adjustable |
|
AES/EBU (optional) |
Connector |
|
XLR F |
|
|
|
Type |
|
Balanced |
|
|
|
Impedance |
Ohm |
110 |
|
|
|
Input Level /Adjust |
dBfs |
0 to -10 |
For 7,5 KHz FM, adjustable |
|
TOS/Link |
|
|
TOS-Link |
|
|
|
|
|
Optical |
|
|
OUTPUTS |
|
|
|
|
|
RF Output |
Connector |
|
N type |
|
|
|
Impedance |
Ohm |
50 |
|
|
RF Monitor |
Connector |
|
BNC |
|
|
|
Impedance |
Ohm |
50 |
|
|
|
Output Level |
dB |
Approx. -60 |
|
|
Pilot output |
Connector |
|
BNC |
|
|
|
Load Impedance |
Ohm |
>5 K |
|
|
|
Output Level |
Vpp |
1 |
Sinusoidal |
|
FUSES |
|
|
|
|
|
On mains |
|
|
1 External fuse F 16 A - 5x20 mm |
|
|
On services |
|
|
X |
|
|
On PA Supply |
|
|
X |
|
|
On driver supply |
|
|
X |
