Language
English
English
Español
BROADCAST TOOLS BT-2X10-DA 2X5 STEREO OR 1X10 MONO DISTRIBUTION AMPLIFIER WITH PLUGGABLE SCREW TERMINAL BLOCK I/O
SKU
BT-2X10-DA
MFR#
2X10-DA
was
$369.00
Special Price
$329.00
Availability:
Out of stock
BROADCAST TOOLS BT-2X10-DA CONFIGURABLE 2X5 STEREO OR 1X10 MONO DISTRIBUTION AMPLIFIER WITH PLUGGABLE SCREW TERMINAL BLOCK I/O
The 2×10 DA analog distribution amplifier is configurable for stereo (2×5) or monaural (1×10) output via internal jumpers. It is equipped with a stereo line level high-Z input, which accepts either a balanced (+4 dBu) or unbalanced (-10 dBV) source and has five active balanced low-Z stereo output amplifiers. Each output amplifier is paired for stereo operation or may be summed for monaural operation without affecting the stereo separation of the other outputs. Each output amplifier has a recessed front panel level control trimmer.
Features/Benefits
- Input gain configurable for +4 dBu balanced inputs or unbalanced -10 dBV input via internal jumpers, eliminating the need for external input level conversion.
- Stereo (2×5) outputs or monaural (1×10) outputs set via internal jumpers.
- Front panel output level adjustment trimmers.
- Removable euro-block screw terminal connectors are used for audio I/O connections. Necessary mating plugs are supplied.
- Fully RFI proofed.
- Up to three units may be mounted on the optional RA-1 rack shelf. Desktop and wall mounting are also possible.
SPECIFICATIONS
- Input Level -10dBV or +4dBu nominal (jumper selectable). +24dBu
- max, @ 600 Ω
- Input Impedance 20K Ω balanced, 10 K Ω unbalanced
- Output level +4dBu nominal, + 24dBu max, @ 600 Ω, balanced
- Output Impedance 100 Ω balanced, 47 Ω unbalanced
- System Gain 20dB
- Frequency Response +/- 0.1dB (22Hz – 22kHz)
- Noise 86 dB below nominal
- THD+N .005% (22Hz – 22kHz @ +4 dBu)
- IMD .005% (250hz/7kHz)
Power:
- PCB Rev A, labelled: “16 VAC Power” 16-18 VAC only,
- 600-1000 mA wall transformer, 2.1mm coaxial plug.
- PCB Rev B, labelled: “+/- 15 VDC Power” PS-1515/IEC Desktop universal switching power supply with IEC inlet.
- +/- 15 VDC 500mA output with 3-pin AMP-style latching power connector.
- The Power supply will accept input voltages from 95 to 235 VAC, 50-60 Hz.
- Dimensions: 5.66" x 7.125” x 1.58", aluminum extrusion chassis with (4) #6-32 screw thread (or #4-40) mounting holes for optional RA-1 rack shelf.
- Options: RA-1 Rack Shelf. 1 RU. Accommodates up to 3 units, filler panels supplied.
