MACKIE 1202VLZ4 12-CHANNEL COMPACT MIXER
The Mackie 1202VLZ4 12-Channel Compact Mixer features high-quality Onyx preamps in a compact mixer design with the high-headroom / low-noise performance your professional applications demand. The mixer is built-like-a-tank with a rugged solid-steel chassis and high-contrast controls for discernible tactile control. With features like a dedicated control room section, it offers a step up in flexibility and performance that is suitable for your professional applications.
Mackie 1202VLZ4Specs
| Noise |
Main Mix Noise:
Main Mix Knob Down, Channel Gain Knobs Down: -100 dBu Main Mix Knob @ Unity, Channel Gain Knobs Down: -86.5 dBu (90 dB signal to noise ratio, ref +4 dBu) Main Mix Knob @ Unity, Channel Gain Knobs @ Unity: -84.5 dBu (20 Hz to 20 kHz bandwidth, 1/4" main out, channels 1 to 4, gain @ unity, channel EQs flat, all channels assigned to main mix, channels 1 and 3 panned left, 2 and 4 panned right) |
| Total Harmonic Distortion (THD) |
Microphone Pre @ Insert: <0.0007%
(1 kHz @ 30 dB gain, 20 Hz to 20 kHz bandwidth) |
| Crosstalk / Attenuation |
Main Mix Knob Down: -75 dBu
Channel Alt / Mute Switch Engaged: -85 dBu Channel Gain Knob Down: -87 dBu (1 kHz relative to 0 dBu, 20 Hz to 20 kHz bandwidth, line in, 1/4" main out, gain at unity) |
| Frequency Response |
Microphone Input to Main Output (Gain @ Unity):
+0, -1 dB, 20 Hz to 50 kHz +0, -3 dB, <10 Hz to >100 kHz |
| Equivalent Input Noise |
150 Ohms Termination: -128.5 dBu, 20 Hz to 20 kHz
Microphone input to insert send out, maximum gain |
| Common Mode Rejection Ratio |
Better than -70 dB @ 1 kHz
|
| Maximum Level |
Microphone In: +22 dBu
Tape In: +16 dBu All Other Inputs: +22 dBu Main Mix XLR Out: +28 dBu All Other Outputs: +22 dBu |
| Impedance |
Microphone In: 2.5 kOhms
Channel Insert Return: 2.5 kOhms All Other Inputs: 10 kOhms or greater Tape Out: 1.1 kOhms All Other Outputs: 120 Ohms |
| Equalizer |
High Shelving: ±15 dB @ 12 kHz
Mid Peaking: ±15 dB @ 2.5 kHz Low Shelving: ±15 dB @ 80 Hz |
| Power Consumption |
25 W, 100 to 120 VAC, 50 to 60 Hz
|
| Operating Temperature |
32 to 104°F (0 to 40°C)
|
| Fuse Rating |
100 to 120 V: 500 mA slo blo, 5 x 20 mm
220 to 240 V: 250 mA slo blo, 5 x 20 mm |
| Dimensions |
10.7 x 11.9 x 3.0" (273.0 x 303.0 x 75.0 mm)
|
| Weight |
6.5 lb (3.0 kg)
|