The Libec QD-10PD Pedestal System with QH1 Head, P1000 Pedestal Column & DL-15B Dolly provides you with a system that supports up to 88 lb of camera and accessories, suitable for use in studio environments. The QH1 head features a flat base and includes a 150mm half ball adapter. It uses a snap-on camera plate that allows you to pop the camera plate into the head from the top and slide the plate forward/back to balance your camera on the head. The included head is a pedestal-capable heavy-duty head supporting up to 88 lb. It features a 7-step pan and tilt drag with independent pan and tilt locks, as well as a continuous counterbalance.
Libec QH1
| Camera Plate Features |
Sliding Balance Plate
|
| Camera Mounting Screw |
2 x 3/8"-16 Male
|
| Balance Plate Sliding Range |
2.95" / 75 mm
|
| Base Mount |
4-Bolt Flat Base
|
| Counter Balance |
Continuous (33 to 77 lb / 14.97 to 34.93 kg)
|
| Center of Gravity |
4.92" / 125 mm
|
| Bubble Level |
1 x Illuminated
|
| Drag Control |
7-Step
|
| Vertical Tilt |
+90° to -70°
|
| Independent Pan Lock |
Yes
|
| Independent Tilt Lock |
Yes
|
| Load Capacity |
88 lb / 39.92 kg
|
| Operating Temperature |
12 to 92°F / -20 to 60°C
|
| Weight |
27.9 lb / 12.66 kg
|
Libec P1000
| Load Capacity |
132.28 lb / 60 kg
|
| Head Fitting |
150mm Flat Base with 4 x Mounting Holes
|
| Steering Ring Diameter |
19.69" / 50 cm
|
| Maximum Operating Air Pressure |
0.93MPa (9.3 bar / 134.9 psi)
|
| Relief Valve Pressure |
0.99MPa (9.9 bar / 143.6 psi)
|
| Minimum Height |
26.77" / 68 cm
|
| Maximum Height |
58.66" / 149 cm
|
| Weight |
57.98 lb / 26.3 kg
|
| Stages |
2
|
| Stroke Range |
Upper: 16.34" / 41.5 cm
Lower: 15.55" / 39.5 cm |
| Leg Radius |
4.92" / 12.50 cm
|
| Wheel Diameter |
4.92" / 12.50 cm
|
| Wheel Lock |
Foot Pressure Lever-Type
|
| Cable Guards |
Removable
|