ASK ABOUT OUR SPECIAL SHIPPING RATES ON ORDERS OVER $1000
Language
English
![](https://7bd.com/media/wysiwyg/smartwave/porto/flags/default.png)
RODE NTG8 BROADCAST QUALITY RF-BIAS SHOTGUN MICROPHONE. INCLUDESSM8 SHOCK MOUNT, WSNTG8 WINDSCREEN AND RCNTG8 STORAGE CYLINDER.
Optimized for high-quality outdoor performance in broadcasting, film production, and sporting events, the Rode NTG8 moisture-resistant shotgun microphone offers the proven technology of the award-winning NTG3 in a longer body with more focused directionality throughout its frequency spectrum. Professional-level features such as ultralow-noise circuitry, enhanced immunity to radio-frequency interference, and minimal handling noise reduce the need to repair and restore audio in postproduction. Its switch- and dial-free design lets you set up quickly and focus on the sound instead of fiddling with various mic settings.
The NTG8's ultrahigh sensitivity allows it to produce robust output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG8 delivers natural on- and off-axis sound due in part to its long interference tube. Clarity is further maintained by the gentle rise in high frequencies and the rumble-reducing attenuation of low bass frequencies.
RODE NTG8 Specs
Form Factor |
Stand/Boom Mount
|
Sound Field |
Mono
|
Element Type |
Condenser
|
Diaphragm |
0.5" / 12.70 mm
|
Polar Pattern |
Supercardioid
|
Orientation |
End Address
|
Circuitry |
Solid-State
|
Pad |
No
|
High-Pass Filter |
No
|
Tone Adjustment |
No
|
Gain Adjustment |
No
|
On-Board Controls |
No
|
Frequency Range |
40 Hz to 20 kHz
|
Maximum SPL |
124 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
|
Off-Axis Rejection |
16 dB at 60°
24 dB at 120° >20 dB at 180° |
Impedance |
25 Ohms
|
Sensitivity |
-20 dBV/Pa at 1 kHz
|
Dynamic Range |
116 dB
|
Signal-to-Noise Ratio |
81 dB A-Weighted
|
Equivalent Noise Level |
8 dB A-Weighted
|
Analog Output |
1x XLR 3-Pin Male (on Mic)
|
Power Sources |
Phantom Power
|
Operating Voltage |
44 to 52 V (Phantom Power)
|
Color |
Silver
|
Mounting |
Shockmount (with Included Hardware)
|
Mounting Thread Size |
5/8"-27 Female (3/8"-16 Female with Included Adapter)
|
Dimensions |
ø: 0.75 x L: 22.01" / ø: 1.9 x L: 55.9 cm (Microphone)
|
Weight |
12.17 oz / 345 g (Microphone)
|